TUBE LABELING SYSTEM AXON 2 BY cab
Axon 2 tube labeling system by cab is suited for labeling tubes individually as a manual workstation or integrated in sample processing systems
Tubes of diameters 10 to 17 mm can be processed, capped or uncapped. Printing and labeling take less than two seconds. After the tubes have labeled, they can be removed one by one or be ejected to a tray. Self-explanatory symbols enable intuitive operation. The label roll and the ribbon are easy to remove.
If it comes to cleaning or in cases of wear, print rollers and transport rollers can be removed easily by the operator with the help of a tool attached.
AXON 2 may be integrated in a Laboratory Information Management System, (LIMS). Data transfer from a PC is possible via interfaces such as RS232, USB, Ethernet or via WLAN.
In stand-alone operation, when no PC is connected, variable data are set with a keyboard or scanner. Power may be supplied by 110 to 240 VAC voltage or 36 to 60 VDC voltage, 24 VDC on request.
2D codes or linear barcodes are printed on self-adhesive labels and the labels are applied on the tubes. Print resolutions of 300 or 600 dpi, a sharp-edge print image and high contrast enable even tiny 2D codes to be verified. Thermal direct and thermal transfer printing are possible.
- STOP: Spacers assembled to the tightening axles
- Slim print rollers
- Peel-off function
- Transport rollers
- Wipe-down rollers
- Pivot arms
- Color LCD touch display
- Thermal Transfer or Thermal Direct
- Printable resolution 300 or 600 dpi
- Print Speed: 150 mm/s
- Print width up to 108 mm (4.25")
- Tubes orientation - horizontal
- Tubes diameter: 10-17 mm / .40" - .70"
- Length capped: 38 - 105 mm / 1.50" - 4.13"